How to use a pole saw for cutting tree branches, pole saws for tree trimming: There are different types of equipment for our daily usage in order to make the work easier, effortless, and moreover effective. Pole saw is one kind of them. It will help you to cut any type of branch quickly as well as efficiently in different types of distances from the ground. The equipment is expanded by the technician in order to gain a fast, fruitful, and spontaneous work from an employee. The equipment is designed adequately easy to use not only for your labor or professional worker but also for you thyself can easily operate the equipment very safely.
What is actually a pole saw?
Pole saw is a kind of device where a chainsaw is settled on the top of a pole. The different name of a pole saw you can see is pole chain saw or a pole pruner. The chainsaw mounted on the top of the pole can be easily separated from the pole and usable by hand for shorter distance use. The device is mainly generated to prune branches that are high enough to reach from the ground surface. The device will help you trimming across surfaces that prevent you from reaching a bush or any kind of tree.
How to use a pole saw?
There are some advice and practical recommendations below for you before you are going to use a pole saw which will help you perform your work more easily and safely. You should know about the training and pruning of trees. In this article, we’ll know 10 basic tips on how to use a pole saw for cutting tree branches.
Set up the instruments properly
You should just have a close look up to your appliance
before you use whether the parts of the device are set up suitably or not. You
should also fix the parts tight enough according to the procedure. Have a view
that batteries are connected well and the pole you are holding is fixed nicely
to the chainsaw.
Clear a large work area
Below the tree where you are going to cut its branches or
twigs, make sure that the place is empty of people and there is not any kind of
property that could be damaged. Because you know falling trees or twigs can be
seriously damaging to the people or even property. For your safety issue, you
have to make sure another thing that the place where you are going to stand
should be free from any hazardous substances. There should be no hole in the
ground too or any fallen branches of trees, exposed roots, etc.
Plan before you cut
Think properly and make a good plan yourself that how and
where you are going to cut. If you cut in the wrong direction then it could
suffer you more than as usual. So take a step back and examine the tree
properly and consider the branches you want to cut. Remember a thing that some
preliminary cut on the branches before your final cut help reducing the weight
of the twigs and help to perform the task easily.
Cut the lower branches first
If you are going cut different branches in your tree then
try to cut lower branches first. It will make your path clear and easy to reach
on the topper branch effortlessly. So that you can cut your higher branches and
Position the saw correctly
Before your cutting make sure that you have a beautiful grip
system on the pole saw. This is very necessary to control the weight of the
pole saw and balancing its position before cutting. Turn up the chainsaw in a
vertical position and then take a brief rest in order to gain the balance of
the weight. When you are done reposition the saw onto its cutting spot(unless
you are making a jump cut) where you planned to cut.
Holding the device before cutting you should move to a
position where you can hold the end of the pole at your chest level while
standing. It will help you holding tightly the device, balance yourself in
cutting the branches, and make a good grip to perform the task well. Don’t ever
cut up and down standing below the twigs. Always stand to the side and when you
will stand to the side you will get a nice angle for you to cut the limbs. And
if your device has a pole distance management system that could be easier for
you to control the length.
Begin cutting with a starting groove
When you start your cutting first you should go slow,
steady, and smooth. It will help you to stabilize the device and make a groove
on it which will help you later to give your next strokes faster and properly
to the appropriate position. Unless you do this your saw in the early strokes
normally slip sideways if the branch is sloped. Although it slips then stop
your machine, reposition the saw, gather your energy and then continue again.
Continue and finish your cut
When your saw is positioned correctly to the groove then you
can continue your cutting faster. Securely positioning in the right place of
the groove enables you to increase the speed of your stroke. As your cuts go
through deeper inside the twig you need to keep eye on it. You should stand off
to the side. In spite of that, it could still fall in unpredictable ways. Make
sure that you are out of the ways of falling in order to keep you safe.
Clean the work area
When the limbs, branches, or twigs fallen down being cut by
the chainsaw, its time to clean up them. As soon as they fall down, the area
should be clear properly.it is just because you don’t want to trip over
yourself instead of removing them.
Prepare for the next cut
Once you removed the branches or twigs fallen down by the first cut then you need to take preparation for your next cut(if needed). You need to clear the ground first, reposition yourself just like before, and then you are ready to perform your next cut.
Overall, it may be said, we can say that the above guide will help you cutting or trimming tree branches by using a pole saw. If you follow the above guide on how to use a pole saw hopefully you will able to cut/trim your tree branches properly.
Keyword: How To Use A Pole Saw: 10 Basic Tips Cutting Tree Branches