If your pull up shower diverter is leaking or doesn’t seem to be working properly, don’t despair. There are some easy things you can do to repair it yourself. Pull up shower diverters are relatively inexpensive, so this isn’t a huge problem. Just make sure to take it to a professional plumber or hardware store to get the right size and type of diverter for your shower. With a little bit of patience and elbow grease, you should be able to fix your pull up shower diverter in no time.
Shut off the water supply to your shower
If you’re doing this repair yourself, the first thing you’ll want to do is shut off the water supply to your shower. This can be done by turning off the valve in the wall that supplies water to your shower. Once the water is turned off, you can begin to remove the old diverter. This is usually done by turning the knob to the left. Unscrew the diverter from the shower arm using a wrench or pliers. You may need to use a little bit of force, but be careful not to strip the threads. Remove any washers or gaskets from the old diverter and set them aside.
Remove the shower head and diverter valve from the pipe
Next, you’ll need to remove the shower head and diverter valve from the pipe. To do this, simply unscrew the shower head from the pipe. Once it’s loose, pull it off of the pipe. You may need to use a little bit of force, but be careful not to damage the finish on your shower head. Now, unscrew the diverter valve from the pipe. You may need to use a wrench or pliers to do this. Again, be careful not to strip the threads. Once the valve is loose, pull it off of the pipe.
How to fix pull up shower diverter
First, check to see if the diverter is properly seated in its housing. If it’s not, simply unscrew it and screw it back in until it’s snug. If that doesn’t solve the problem, then you may need to replace the washer. To do this, unscrew the diverter and remove the washer. Take the old washer to a hardware store to find an exact replacement.
Once you have the new washer, simply screw the diverter back on and tighten it until the leak stops. If you’re still having problems, then you may need to replace the entire diverter. Pull up shower diverters are relatively inexpensive, so this isn’t a huge problem. Just make sure to take it to a professional plumber or hardware store to get the right size and type of diverter for your shower. With a little bit of patience and elbow grease, you should be able to fix your pull up shower diverter in no time.
Clean any calcium deposits or gunk that may be blocking the diverter valve
If there are any calcium deposits or gunk blocking the diverter valve, use a screwdriver or wire brush to clean it off. You may also need to use a little bit of elbow grease to get it clean. Once it’s clean, you can reattach the shower head and diverter valve to the pipe. Turn the water back on and test the diverter.
Once everything is back in place, turn the water back on and test the diverter. Pull up on the knob to make sure that the water shuts off properly. You may need to adjust the position of the diverter until it works correctly. If it’s still not working, then you may need to replace the entire diverter.
Put everything back together and turn on the water
Now that everything is clean and in its proper place, you can put everything back together and turn on the water. Start by screwing the diverter back into the shower arm. Be careful not to strip the threads. Next, reattach the washers or gaskets to the diverter. Finally, turn on the water supply to your shower and test the diverter. Pull up on the diverter knob and make sure that water is flowing through the shower head. If everything seems to be working properly, you’re all done!
Keyword: DIY Pull Up Shower Diverter Repair Made Easy